phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Starter Kit PicoCore™MX8ULP Linux
Starter Kit PicoCore™MX8ULP Linux
  360,- €
Tax not included

Evaluation kit PicoCore™MX8ULP mit baseboard, MIPI-DSI to LVDS adapter, 7" LVDS display, cable kit, access data to documentation and software

PCoreMX8ULP TOP1
PicoCore™MX8ULP-V1I
NXP i.MX 8ULP ARM Dual Cortex-A35 + Cortex-M33, 2GB LPDDR4 RAM, 8GB eMMC, 2k EEPROM, 100Mbit LAN Phy, Audio Codec, WLAN, BT, MIPI-CSI, MIPI-DSI, -25°C - +85°C
SKU: PCoreMX8ULP-V1I

PCoreBBDSI FERT1 TOP
PicoCore™100 Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT1B

LCD 7 LVDS 1 front web
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1

B.MKAB
LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44


Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT4

bant6
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6


MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1

MHS.PC100.1 Board Oblique
Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1

B.MKUE.5 ASSMANN VR2032N
Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 

Displays and Display Kits

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 

Touch-Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2		 35,- €
 

Cables

B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 
B.MKAB47 Capacitive Touch Cable
6-pin cable with matching connector for connecting an I2C touch to F&S boards
SKU: B.MKAB.47		 10,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35		 7,- €
 

Adapters

ADP NT24V2 OBLIQUE TOP Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3		 40,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 30,- €
 

Plug Connectors

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
MHS.PC100.1 Board Oblique Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1		 10,- €
 
B.MKUE.5 ASSMANN VR2032N Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2		 12,- €
 

Varianten

PCoreMX8ULP TOP1 PicoCore™MX8ULP-V1I

SKU: PCoreMX8ULP-V1I		 Request  
PCoreMX8ULP TOP1 PicoCore™MX8ULP-V2I

SKU: PCoreMX8ULP-V2I		 Request  
PCoreMX8ULP TOP1 PicoCore™MX8ULP-V5I

SKU: PCoreMX8ULP-V5I		 Request  

Starterkit

PicoCoreMX8MM mit SINTF OBLIQUE Starter Kit PicoCore™MX8ULP Linux
Evaluation kit PicoCore™MX8ULP mit baseboard, MIPI-DSI to LVDS adapter, 7" LVDS display, cable kit, access data to documentation and software
SKU: PCore8ULP-SKIT-LIN		 360,- €
 

We provide a tested software environment for the PicoCoreMX8ULP.Part of this environment is the Linux Yocto release and the BSP for the Cortex-M33.Announcements about new versions of this package are made in the support forum.

➜ PicoCoreMX8ULP Forum

Yocto

Architecture Type Release Name Bootloader Kernel OS Help File Software
FSIMX8ULP Yocto fsimx8ulp-Y2024.04-pre U-Boot 2024.04 Linux 6.1.55 Yocto 4.2 Mickledore

For the CPU NXP i.MX8ULP F&S offers a Yocto based environment. In addition, F&S provide a BSP for FreeRTOS and bare metall programming. This BSP makes it easier to use features of Cortex-M33.

Yocto has established itself as the standard for Linux build environments in recent years. Our standard configuration, which is intended to give a first impression of the module's functionality, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

FreeRTOS

In addition to the 2 Cortex-A35 cores, the NXP i.MX 8ULP SoC also has a Cortex-M33 core. The Cortex-M33 core is particularly suitable for real-time tasks or for power saving.
F&S offers a completely tested BSP for the use of the Cortex-M33 for FreeRTOS or Bare Metal application.

Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 36

Fedora 36 is a VirtualBox Appliance based on Fedora 36, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.

login screen

VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for:

  • fsimx8mp-Y2023.09 (/home/developer/fsimx8mp-Y2023.09)
  • fsimx8mm-Y2023.10 (/home/developer/fsimx8mm-Y2023.10)
  • fsimx8mm-B2023.11 (/home/developer/fsimx8mm-B2023.11)
  • fsimx8mn-Y2024.02 (/home/developer/fsimx8mn-B2024.02)

More BSP will be included. Please see our support forum for updates.

➜ Support Forum - Fedora 27

The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.

Besides that, it contains a configured environment for Qt development (Qt) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Please notice that it is required to register on our website to download this machine.

➜ Download F&S Development Machine - Fedora 26
➜ Quickstart Dokumentation

PicoCoreMX8ULP - Product Flyer

PicoCoreMX8ULP - Linux

PicoCoreMX8ULP - Hardware

PicoCore Carrier Board DSI/LVDS from Rev 1.50

PicoCore Carrier Board DSI/LVDS Rev 1.10 to 1.40

Varianten

PCoreMX8ULP TOP1 PicoCore™MX8ULP-V1I

SKU: PCoreMX8ULP-V1I		 Request  
PCoreMX8ULP TOP1 PicoCore™MX8ULP-V2I

SKU: PCoreMX8ULP-V2I		 Request  
PCoreMX8ULP TOP1 PicoCore™MX8ULP-V5I

SKU: PCoreMX8ULP-V5I		 Request  

Starterkit

PicoCoreMX8MM mit SINTF OBLIQUE Starter Kit PicoCore™MX8ULP Linux
Evaluation kit PicoCore™MX8ULP mit baseboard, MIPI-DSI to LVDS adapter, 7" LVDS display, cable kit, access data to documentation and software
SKU: PCore8ULP-SKIT-LIN		 360,- €
 

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint