phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Menu

PicoCore™MX8MP

Computer On Module with NXP i.MX 8M Plus CPU

mp1

 

Starterkit PicoCore™MX8MP Linux
  360,- €
Tax not included

NXP i.MX 8MP Evaluation Board PicoCore™MX8MP-V4I-LIN, baseboard, display, cable kit, access data to documentation and software

 

The PicoCore™MX8MP is mentioned in the February issue of Computer&Automation. Read the article (German only) on page 21.

The digital magazine Elektroniknet reports about the PicoCore™MX8MP. Read the article here (German only).

The PicoCore™MX8MP is also featured on HackerBoards, one of the largest databases for SBCs in the world (English only).

CNX Software introduces NXP i.MX 8M Plus modules. Read the article on the PicoCore™MX8MP here.

Electronics-lab reports about the PicoCore™MX8MP module as well.  Read the article here.

mp2

PicoCore™MX8MP  
State Samples  
CPU  
CPU NXP i.MX 8M Plus  
Core ARM Cortex-A53 + Cortex-M7  
No of Cores 2, 4 + M7  
Frequency max. 1,8GHz + 800MHz  
L2-Cache 512KB  
GPU 3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1  
VPU 1080p60, h.265/4, VP9, VP8,
Video Encode: 1080p60, h.265/4		  
Operating System  
Linux Yocto
(uboot installed)		  
Real Time FreeRTOS  
Memory  
Flash max. 32GB eMMC EEPROM  
RAM max. 8GB LPDDR4  
Interfaces  
SD-Card max. 2x external  
Ethernet max. 2x 100/1000Mb
opt. RGMII		  
WiFi 802.11 ac/a/b/g/n  
BT 5.0 LE  
USB Host 1x 2.0/ 3.0  
USB Device 1x OTG 2.0/ 3.0  
CAN max. 2x  
UART max. 4x  
I2C max. 4x  
SPI max. 2x  
Audio Line In/ Out/ Mic/ Headphone/ I2S  
Touch Panel analog resistive and PCAP Touch ext. via I2C  
Camera analog/digital max. 2x MIPI-CSI  
PCIe 1x  
RTC CPU or
external IC		  
additional Interfaces max. 4x PWM, SPDIF, ESAI, SAI, SSI  
Display  
LVDS 1-2x 4 Lanes or
1x 8 Lanes		  
CRT/DVI -/1x  
MIPI-DSI 1x 4 Lanes  
Common  
Supply Voltage +3.8V bis 5.5VDC  
Power Consumption 3W typ.  
Operating Temperature 0°C - +70°C
opt. -20°C - +85°C
opt. -40°C - +85°C		  
Size 35x40mm
(LxB)		  
Weight ~10g  
Long Term Availability 2035  


PicoCore™MX8MP-V2-LIN PicoCore™MX8MP-V3I-LIN PicoCore™MX8MP-V3XI-LIN PicoCore™MX8MP-V4I-LIN PicoCore™MX8MP-V4XI-LIN
State Samples Samples Samples Samples Samples
CPU - - - - - -
CPU NXP i.MX 8M Plus NXP i.MX 8M Plus NXP i.MX 8M Plus NXP i.MX 8M Plus NXP i.MX 8M Plus
Core ARM Cortex-A53 + Cortex-M7 ARM Cortex-A53 + Cortex-M7
NPU, ISP, HIFI4		 ARM Cortex-A53 + Cortex-M7
NPU, ISP, HIFI4		 ARM Cortex-A53 + Cortex-M7
NPU, ISP, HIFI4		 ARM Cortex-A53 + Cortex-M7
NPU, ISP, HIFI4
No of Cores 4x A53 + 1x M7 4x A53 + 1x M7 4x A53 + 1x M7 4x A53 + 1x M7 4x A53 + 1x M7
Frequency 1,8GHz + 800MHz 1,6GHz + 800MHz 1,6GHz + 800MHz 1,6GHz + 800MHz 1,6GHz + 800MHz
L2-Cache 512KB 512KB 512KB 512KB 512KB
GPU 3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1 3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1 3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1 3D/2D graphic acceleration ES 3.1/3.0, CL™ 1.2 VG™ 1.1 3D/2D graphic acceleration ES 3.1/3.0, CL™ 1.2 VG™ 1.1
VPU - 1080p60, h.265/4, VP9, VP8,
Video Encode: 1080p60, h.265/4		 1080p60, h.265/4, VP9, VP8,
Video Encode: 1080p60, h.265/4		 1080p60, h.265/4, VP9, VP8
Video Encode: 1080p60, h.265/4		 1080p60, h.265/4, VP9, VP8
Video Encode: 1080p60, h.265/4
Operating System - - - - - -
Linux Yocto
(uboot installed)		 Buildroot/ Yocto (uboot installed) Yocto
(uboot installed)		 Yocto
(uboot installed)		 Yocto
(uboot installed)
Real Time FreeRTOS FreeRTOS FreeRTOS FreeRTOS FreeRTOS
Memory - - - - - -
Flash 4GB eMMC 8GB eMMC
2k EEPROM		 8GB eMMC
2k EEPROM		 8GB eMMC
2k EEPROM		 8GB eMMC
2k EEPROM
RAM 1GB LPDDR4 2GB LPDDR4 2GB LPDDR4 2GB LPDDR4 2GB LPDDR4
Interfaces - - - - - -
SD-Card 1x extern 1x extern 1x extern 1x extern 1x external
Ethernet 2x GBit LAN 2x 100/1000Mb 2x 100/1000Mb 2x 100/1000Mb 2x 100/1000Mb
WiFi - 802.11 ac/a/b/g/n 802.11 ac/a/b/g/n 802.11 ac/a/b/g/n 802.11 ac/a/b/g/n
BT - 5.0 LE 5.0 LE 5.0 LE 5.0 LE
USB Host 1x 2.0 1x 3.0 1x 3.0 1x 3.0 1x 3.0
USB Device 1x OTG 2.0 1x OTG 3.0 1x OTG 3.0 1x OTG 3.0 1x OTG 3.0
CAN 2x max. 2x max. 2x 2x 2x
UART max. 4x max. 4x max. 4x max. 4x max. 4x
I2C max. 4x max. 4x max. 4x max. 4x max. 4x
SPI max. 2x max. 2x max. 2x max. 2x max. 2x
Audio Line In/ Out/ Mic/ Headphone Line In/ Out/ Mic/ Headphone Line In/ Out/ Mic/ Headphone Line In/ Out/ Mic/ Headphone Line In/ Out/ Mic/ Headphone
Touch Panel analog resistive and PCAP Touch ext. via I2C analog resistive and PCAP Touch ext. via I2C analog resistive and PCAP Touch ext. via I2C analog resistive and PCAP Touch ext. via I2C analog resistive and PCAP Touch ext. via I2C
Camera analog/digital 1x MIPI CSI 2x MIPI CSI 2x MIPI-CSI 2x MIPI-CSI 2x MIPI-CSI
PCIe 1x 1x 1x 1x 1x
RTC external IC external IC external IC external IC external IC
additional Interfaces max. 4x PWM, SPDIF, ESAI, SAI, SSI max. 4x PWM, SPDIF, ESAI, SAI, SSI max. 4x PWM, SPDIF, ESAI, SAI, SSI max. 4x PWM, SPDIF, ESAI, SAI, SSI max. 4x PWM, SPDIF, ESAI, SAI, SSI
Display - - - - - -
LVDS 1x 8 Lanes - - 1x 4 Lanes 1x 4 Lanes
CRT/DVI - 1x DVI 1x DVI - -
MIPI-DSI - 1x 4 Lanes 1x 4 Lanes 1x 4 Lanes 1x 4 Lanes
Common - - - - - -
Supply Voltage +3.8V bis 5.5VDC +3.8V bis 5.5VDC +3.8V bis 5.5VDC +3.8V bis 5.5VDC +3.8V bis 5.5VDC
Power Consumption 3W typ. 4W typ. 4W typ. 3W typ. 3W typ.
Operating Temperature 0°C - +70°C -20°C - +85°C -40°C - +85°C -20°C - +85°C -40°C - +85°C
Size 35x40mm
(LxB)		 35x40mm
(LxB)		 35x40mm
(LxB)		 35x40mm
(LxB)		 35x40mm
(LxB)
Weight ~10g ~10g ~10g ~10g ~10g
Long Term Availability 2035 2035 2035 2035 2035
PicoCore™MX8MP-V2-LIN PicoCore™MX8MP-V3I-LIN PicoCore™MX8MP-V3XI-LIN PicoCore™MX8MP-V4I-LIN PicoCore™MX8MP-V4XI-LIN

Starterkit PicoCore™MX8MP Linux
NXP i.MX 8MP Evaluation Board PicoCore™MX8MP-V4I-LIN, baseboard, display, cable kit, access data to documentation and software
SKU: PCoreMX8MP-SKIT-LIN		 360,- €
 

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19		 200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 

Touch Kits

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH		 35,- €
 
resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.57		 50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 

Adapters

ADP NT24V2 OBLIQUE TOP Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2		 40,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1 		25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R100PS.3		 30,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3		 10,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
MHS.PC100.1 Board Oblique Heat Spreader
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1		 10,- €
 

 

 

 

 

 

 

 

 

Yocto

For the CPU NXP i.MX8M Plus F&S offers a Yocto based environment. We offer the Linux BSP fsimx8mp-Y2021.07, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

The BSP contains the source code packages of U-Boot (2020.04), Linux kernel (based on 5.4.70) and Yocto (3.0 Zeus) adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. Last but not least, detailed documents on the hardware are included, as well as the First Steps documentation for an easy start.

F&S will offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 27 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Yocto release Y2021.07

Development start in under an hour
F&S Development Machine - Fedora 27


For a quick start into development with Linux we provide a VirtualBox-based virtual hard disk VHD for download. The VHD uses Fedora 27 as Linux distribution.

With this machine you can start your development in less than an hour.

The machine is free of charge for our customers.

login screen

VirtualBox is a powerful product for corporate customers and at the same time the only professional solution which is freely available as Open Source Software under the terms of the GNU General Public License Version 2.
The F&S Development Machine contains pre-installed board support packages for fsimx8mm and fsimx8mp (64 bit CPU).
The appropriate F&S toolchain is installed in the HVD, the source code is extracted and ready to use.
Necessary system packages and tools are also already installed.
Furthermore, it contains a configured environment for QT development (QT5) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Note: To download the Development Machine, you must be registered on our website.

➜ More information about the F&S Development Machine in the F&S Support Forum
➜ Download F&S Development Machine - Fedora 27
➜ Quickstart Documentation

PicoCoreMX8MP - Product Flyer

PicoCoreMX8MP - Linux

PicoCoreMX8MP - Hardware

Variants

PCoreMX8MP V4I TOP PicoCore™MX8MP-V4I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MP-V4I-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MP-V2-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MP-V2-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MP-V3I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MP-V3I-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MP-V3XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MP-V3XI-LIN		 Request  
PicoCore™MX8MP-V4XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -40°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MP-V4XI-LIN		 Request  

Starterkit

Starterkit PicoCore™MX8MP Linux
NXP i.MX 8MP Evaluation Board PicoCore™MX8MP-V4I-LIN, baseboard, display, cable kit, access data to documentation and software
SKU: PCoreMX8MP-SKIT-LIN		 360,- €
 

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19		 200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 

Touch Kits

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH		 35,- €
 
resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.57		 50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 

Adapters

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 
ADP NT24V2 OBLIQUE TOP Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2		 40,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1 		25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R100PS.3		 30,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3		 10,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 

Windows 10 IOT Enterprise

Win 10 IoT Enterprise on i.MX 8 & 9 family brings full Windows application capabilities in a small footprint delivering a low cost, low power solution ideal for compact & fan less designs .
Customers get longer-term OS support. Window10IoT enterprise LTSC release has an optional 10 Years support.
Access thousands of existing apps and leverage a huge ecosystem.
Re-use your existing C# .Net application and bring to a new level.
Future releases will support GPU acceleration for Chrome/Edge, WPF apps and video playback optimizations.
Use existing enterprise-grade device management tools to keep devices up-to-date and operating reliably.
Secure Boot as well as Over the Air update is integrated.
Protect your devices with world-class security built into Windows for IoT Enterprise and deliver a predicable experience with device lockdown.
Instant Multi-Cloud connectivity is also a feature of Win 10 IOT Enterprise.

Please contact us to get more information about features and availability.

Computer on Module with NXP i.MX 8M Plus

Another member of the compact PicoCore™ Computer On Module product family is offered with NXP i.MX 8M Plus CPU.
The form factor size of only 35 x 40mm allows the use in compact housings. The module features excellent multimedia functions and is ideally suited for machine learning and industrial IoT applications thanks to its reliability.

Heterogeneous Multicore Processor Concept

Starting with the i.MX8M Nano CPU and the i.MX8M Mini CPU, the i.MX8M 8M Plus CPU from NXP rounds off the i.MX8M CPU range.
Several additional functions and interfaces were added, such as machine learning, CortexM7 with 800MHz, LVDS, MIPI-DSI, and HDMI as display interfaces, a high-performance graphics unit (2D/3D), USB 3.0, and CAN-FD to name just a few.

The i.MX 8M Plus is a heterogeneous multicore application processor for embedded modules. Used on the PicoCore™ System on Module, it is ideally suited for applications requiring powerful graphics processing and multimedia features, machine learning, and industrial 4.0 applications.

The processor consists of a Dual or Quad ARM® Cortex®-A53 core with up to 1.8GHz, plus a Cortex®-M7 core for real-time processing at 800MHz. The processor also features a Neural Processing Unit (NPU).
The i.MX 8M Plus features video encode (incl. h.265) and decode, 2D/3D graphics acceleration, and various audio and voice functionalities.

➜ more information on NXP i.MX 8M Plus applications processor

Long term availability until 2035

Another feature is the long availability of the PicoCoreMX8MP until at least 2035.

  

Features and Interfaces

The PicoCore™MX8MP has sufficient memory (RAM and eMMC Flash).

The module offers many interfaces on the 2x 100 pin connectors.

The PicoCore™MX8MP has max. 2x Gigabit Ethernet (opt.. RGMII), 802.11 ac/a/b/g/n WLAN, BT 5.0 LE, 1x USB Host 2.0/3.0, 1x USB Device OTG 2.0/3.0, max. 2x CAN, max. 4x UART, max. 4x I2C, max. 2x SPI and Audio Line In/ Out/ Mic/ Headphone/ I2S. The Dual Image Signal Processor allows a max. of 2x MIPI-CSI cameras. Additionally RTC, max. 4x PWM, SPDIF, ESAI, SAI, and SSI are available.

For display control a MIPI-DSI interface with four lanes or 1-2 LVDS interfaces with four lanes, or an LVDS interface with eight lanes or DVI is available.

Touch panels can be connected externally via I2C.

Operating system

The operating system adapted for the PicoCore™MX8MP is Linux. Linux Yocto supports all interfaces so that simple software development can be guaranteed without great hardware knowledge.

FreeRTOS is available to control the real-time kernel M7.

NXP i.MX 8M Plus Linux Development Board

For an easy start of development, we offer an immediately executable PicoCore™MX8MP starter kit including embedded board, baseboard, display, cables, and access to documentation and software. The software includes the Board Support Package and Toolchain for Bare Metal or FreeRTOS.

This is rounded off by our wide range of software services, workshops, and free support via the forum, e-mail, and telephone.

Support

Phone:(+49)(0)711 123722-0
Fax:(+49)(0)711 123722-99

Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
D-70569 Stuttgart

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint