phonenumber +49(0)711 123722-0
|
DE EN

PicoCore™MX7ULP

COM with NXP i.MX 7ULP CPU


For the start of the development, we recommend:

Starterkit PicoCore™MX7ULP Linux
  340,- €
Tax not included

PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software



Power Consumption in Deep Power Down Mode about 12 mW only Power Consumption in Run Mode (LCD on, Idle) about 280mW only

PCoreMX7ULP BB TOP OBLIQUE Starterkit PicoCore™MX7ULP Linux
PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software
SKU: PCoreMX7ULP-SKit
340,- €
 

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55
10,- €
 

Adapters

ADPNT24V2 und Kabel Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2
40,- €
 
ADP MIPI2LVDS1 OBLIQUE TOP MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1
25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1
25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3
20,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22
70,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3
10,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
4.50 €
 

Yocto and Buildroot

The Linux BSP "fsimx7ulp-B2019.12" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or X11, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.

As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx7ulp-Y2020.03, which is based on Yocto.

Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more

Both BSPs include the source code packages from U-Boot (2017.03), Linux kernel (based on 4.9.88) and Buildroot (2019.05.01) or Yocto (2.4) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

More information about the new Buildroot Release B2019.12
More information about the new YOCTO release Y2020.03


Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 27

Fedora 27 is a VirtualBox Appliance based on Fedora 27, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.

login screen

VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for fsimx6, fsimx6sx, fsimx6ul and fsimx7ulp.
The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.
Besides that, it contains a configured environment for Qt development (QT5) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Please notice that it is required to register on our website to download this machine.

Download F&S Development Machine - Fedora 27
Quickstart Dokumentation

PicoCoreMX7ULP - Product Flyer



Variant

PicoCoreMX7ULP TOP 450px PCore™MX7ULP-V4-LIN
NXP i.MX 7ULP ARM Cortex-A7 + Cortex-M4 1GB RAM, 1MB SPI Flash, 4GB eMMC, Audio, WLAN, BT, MIPI-DSI, 0°C - +70°C, 5V Versorgung, Linux Yocto
SKU: PCoreMX7ULP-V4-LIN
Request  

Starterkit

PCoreMX7ULP BB TOP OBLIQUE Starterkit PicoCore™MX7ULP Linux
PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software
SKU: PCoreMX7ULP-SKit
340,- €
 

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55
10,- €
 

Adapters

ADPNT24V2 und Kabel Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2
40,- €
 
ADP MIPI2LVDS1 OBLIQUE TOP MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1
25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1
25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3
20,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22
70,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3
10,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
4.50 €
 

Computer on Module with NXP i.MX 7ULP

The first member of the new and compact PicoCore™ Computer On Module product family is offered with NXP i.MX 7ULP ARM® CPU.
Further PicoCore™ modules will folllow.
The size of 35 x 40mm only allows use in compact housings.

Heterogeneous Multicore Processor Concept

A NXP CPU with Dual-Core ARM® Cortex®-A7 with 800MHz and Cortex®-M4 Core is used. NXP pursues its heterogeneous concept with Linux on the ARM® Cortex®-A7 core and FreeRTOS on the ARM® Cortex®-M4 core.
The Cortex-M4 can be used for fast control and regulation functions or for processing fast interface protocols.
Both cores (Cortex-A7 and -M4) are connected to the internal bus fabric and have the possibility to access all peripherals.
The CPU offers 2D Graphics Accelerator for media applications.

The NXP iMX7 ULP stands for an extremely low power consumption and long battery life.
Targeted towards the growing market of portable devices.

It is very well suited for projects focusing on low size and energy consumption.

Power Consumption in Deep Power Down Mode is about 12mW only and in Run Mode (LCD on, Idle) about 280mW only.

More Information On NXP i.MX 7ULP Applications Processor

 

The PicoCore™MX7ULP low power embedded system comes with up to 1GB LPDDR3 RAM, 64MB SPI Flash and 32GB eMMC Flash.

Numerous Interfaces

The microcontroller offers interfaces such as WLAN, BT, 5x Serial, USB2.0 OTG and 3x I²C.

LCD TFTs can be connected via MIPI-DSI. Touch is available externally via I²C.

Operating System

The customized operating system Linux Yocto supports all interfaces, guaranteeing an easy software development without a deeper understanding of hardware.

For a smooth evaluation we offer an iMX7 ULP development board with Linux.

Long-term Availability Up Until 2029

Another feature is the long-term availability until minimum 2029.