phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoCore™MX8MM Linux

 

Starterkit PicoCore™MX8MM Linux
  360,- €
Tax not included

PicoCore™MX8MM-V3-LIN, base board, display, cable kit, access data to documentation and software

PicoCoreMX8MM TOP
PicoCore™MX8MM-V3-LIN
NXP i.MX 8M Mini ARM Cortex-A53 + Cortex-M4, 1GB RAM, 512MB Flash, Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MM-V3-LIN

PCoreBBDSI TOP
PicoCore™MX8MM/-MX8MN Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT1B

B.LCD.19
7" LVDS Display with PCAP Touch
7" TFT LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19

B.MKAB51
LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

bant6
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS
500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 

Touch Kits

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 
resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C
Request  

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55
10,- €
 

Adapters

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1
100,- €
 
ADPNT24V2 und Kabel Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2
40,- €
 
ADP MIPI2LVDS1 OBLIQUE TOP MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1
25,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN
40,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1
25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1
25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R100PS.3
25,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP
500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3
10,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22
70,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
4.50 €