FSiMX6 - Change Log


FSiMX6 - V2.90 (Released 2020-09-29)
====================================


Only tested with NetDCUA9.

- 0004366: [Touch driver] Add support for FT5426 - resolved
- 0004371: [Touch driver] EXC8X sometimes an up event is missed - resolved
- 0004386: [Touch driver] Add support for TSC2004 - resolved
- 0004349: [Touch driver] Add support for EXC8X with 16 bit resolution - resolved
- 0004325: [Display] Option to enable spread spectrum for RGB interface - resolved
[5 issues]


FSiMX6 - V2.80 (Released 2020-04-30)
====================================

- 0004229: [PWM] Add default Registry settings for NetDCUA9 - resolved
- 0004273: [Kernel] Fit kernel to C7E runtime license (remove some catalog items) - resolved
- 0004274: [Kernel] Add Unicode Script Processor for Complex Scripts (SYSGEN_UNISCRIBE) WEC7 only - resolved
- 0004191: [FSBUS] Add FSBus driver for NetDCUA9 - resolved
- 0004192: [FSBUS] Add Registry for adjust read/write chip select assertion/negation - resolved
[5 issues]


FSiMX6 - V2.70 (Released 2019-11-12)
====================================

- 0004062: [Touch driver] SX865x may not work after touch down while boot process - resolved
- 0003988: [Touch driver] Add support for common ILITEK touch modules using protocol V3.X data format - resolved
- 0003355: [Serial Driver/Interface] Add UARTIntf driver for NetDCUA9 - resolved
- 0003354: [Serial Driver/Interface] Add parinft driver for NetDCUA9 - resolved
- 0003877: [Touch driver] SX865X: check if a chip reset by ESD occured - resolved
- 0003920: [PARINTF Driver] Driver works not at the same time with matrix keyboard - resolved
- 0003928: [AIN] Improve performance. Sampling an adc channel sometimes takes ~1 sec. - resolved
- 0003153: [RTC] Improve timer functions to avoid corrupted values - resolved
- 0003896: [Serial Driver/Interface] Add registry for UART2 (QBlissA9r2 only) - resolved
- 0003895: [Serial Driver/Interface] Debug port is not useable from OS (QBlissA9r2 only) - resolved
- 0003846: [Touch driver] Add support for EETI Multi-Touch EXC80H/EXC82H - resolved
- 0003806: [DIO] Wait for interrupt returns immediately (seems refer to IOPin7 on NetDCUA9 only) - resolved
- 0003559: [CAN] Received frames with RTR bit are not recognized - resolved
- 0003541: [Display] Using boot screen backlight brightness is not adjustable via I2C - resolved
[14 issues]


FSiMX6 - V2.60 (Released 2018-11-08)
====================================

- 0003473: [F3S] In special case filesystem tries to write data to wrong partition - resolved
- 0003516: [F3S] F3S doesn't work (WEC2013 only) - resolved
[2 issues]


FSiMX6 - V2.50 (Released 2018-09-26)
====================================


F3S not working

- 0003467: [PARINTF Driver] SYSGEN_BSP_FS_PARINTF not set - resolved
- 0003172: [Timer driver] Improve timer driver - resolved
- 0003327: [Serial Driver/Interface] CTS is not properly detected - resolved
- 0002890: [Serial Driver/Interface] RTS/CTS does not work. - resolved
- 0003413: [Touch driver] Add support for multi-touch HY461x - resolved
- 0003396: [Display] DEN signal is not working (NetDCUA9 only) - resolved
- 0002881: [NAND-FMD] Write failure will not be handled - resolved
- 0003372: [USB host] USB Full Speed devices do not work - resolved
- 0003348: [Touch driver] NetDCU9: Touch is not working anymore - resolved
- 0003346: [CAN] NetDCUA9: CID1 and CID2 are inverted contrary previous NetDCUX version - resolved
- 0003053: [CAN] While only read messages interrupt may be missed - resolved
- 0003339: [HDMI] Some resolutions are not working if boot screen is activated. - resolved
- 0003321: [AIN] Add support for AIN (NetDCUA9 only) - resolved
- 0003316: [FSMinShell] Background bitmap can't be loaded (WEC2013 only) - resolved
- 0003313: [CEDDK] Correct IO table for QBlissA9r2 - resolved
- 0003303: [Touch driver] Touch WM9715 react sometimes very slow (NetDCUA9 only). - resolved
- 0003304: [NAND-FMD] Deactivation of FCR doesn't work correctly. - resolved
- 0003302: [General] Add support for QBlissA9r2 - resolved
- 0003295: [Touch driver] Add support for cap. touch controller SiS9255 - resolved
- 0003299: [Touch driver] Add support for cap. touch controller EXT3000 - resolved
- 0003298: [NI2C] Setting values of drive strength and pull up doesn't work - resolved
- 0003294: [NI2C] Bus toggle doesn't work correctly if it is lock up - resolved
[22 issues]


FSiMX6 - V2.40 (Released 2017-08-01)
====================================

- 0003279: [Display] Command XDI shows flicker between bootloader and WinCE - resolved
- 0003259: [Display] Bootscreen is not working in some situations - resolved
- 0003260: [Tool/Utility] NDCUCFG: Add support for version V68 - resolved
- 0003278: [Audio] Prefetch-Abort in case audio codec is not soldered - resolved
[4 issues]


FSiMX6 - V2.30 (Released 2017-05-29)
====================================

- 0003219: [Kernel] Reboot via "ndcucfg" does not work - resolved
- 0003106: [PCIexpress] Add support for PCIe bus - resolved
- 0002817: [USB host] USB keyboard does not work after reset on armStoneA9r2 - resolved
- 0003101: [USB host] At fast plug in some USB devices may not recognized - resolved
- 0002931: [Ethernet] No communication on 10MBit with Autonegotiation - resolved
- 0003226: [Display] RGB: Mode 6 and 19 shows some wrong colors in vertical direction (DriveStrength to low) - resolved
- 0003225: [Display] Add 24BPP output width for DRGB interface - resolved
- 0003044: [Display] Background color of buttons don't work - resolved
- 0003224: [OAL] Baudrate settings from nboot are not used, always set to 115200 - resolved
- 0003055: [USB host] USB host stop working after several hours of operation - resolved
- 0002841: [USB host] After unplug and plug in a USB Device after several hours of operation the device may not recognized any more - resolved
- 0002632: [NSPI] Implement default registry for use of second chip select (efusA9 only) - resolved
- 0002992: [General] Add support for NetDCUA9 - resolved
- 0002895: [Kernel] Starting client special program, after running several hours, it came some exceptions. - resolved
- 0003156: [Bluetooth] Add bluetooth support for Marvel SDIO8787 - resolved
- 0002842: [Kernel] Add support for video acceleration (WEC7 only) - resolved
- 0003182: [Ethernet] Improve UDP/TCP communication functionality - resolved
- 0003177: [ETHMAN] ETHMAN hangs when no shell is registered - resolved
- 0003176: [FSMinShell] ETHMAN doesn't start because of missing shell API registration - resolved
- 0003045: [General] Compact 2013: Mouse moves to 0/0 when dialog is closed - resolved
- 0003154: [Touch driver] Add support for mTouch AR1100 Resistive Touch Screen Controller (WEC7 only) - resolved
- 0003125: [NAND-FMD] Add basic support for background scan of stored data - resolved
- 0003124: [NAND-FMD] Improve read/write access - resolved
[23 issues]


FSiMX6 - V2.20 (Released 2016-12-07)
====================================

- 0003074: [NI2C] Repeated start does not work - resolved
- 0003040: [NI2C] Sometimes occurs an exception while boot process - resolved
- 0002818: [WLAN] WEC2013: Network config dialog doesn't pop-up - resolved
- 0003112: [General] Add Windows Embedded Compact 2013 updates up to 2016M10 - resolved
- 0003111: [General] Add Windows Embedded Compact 7 updates up to 2016M09 - resolved
- 0003109: [F3S] Improve file search - resolved
- 0002981: [Display] While using bootscreen feature display is some milli seconds dark between EBoot and Kernel - resolved
- 0003051: [Display] Show/hide mouse cursor when USB mouse is available/unavailable - resolved
- 0003050: [Kernel] Write PSD from OS overwrites WCE MAC - resolved
- 0002630: [Audio] Fixed value for lineout volume on SGTL5000 - resolved
- 0003039: [Touch driver] Registry value SampleRate isn't used (only SX865x) - resolved
- 0003023: [Touch driver] Add pen release irq handling in trigger mode (only SX865x) - resolved
- 0003018: [Touch driver] Add registry value to change pen detection pull-up (only SX865x) - resolved
- 0003030: [Touch driver] Add registry values to change min, max pressure bounds (only SX865x) - resolved
- 0003025: [Kernel] Add Kernel-IOControl to read current kernel checksum - resolved
- 0003026: [Touch driver] Touch_EDT_FT5606 does not work anymore - resolved
- 0003017: [WLAN] armStoneA9r2; All access points are dropped if one AP sends invalid data - resolved
- 0002983: [Serial Driver/Interface] Remove and handle debug output "Warning : BaudRate (<Baudrate>)" which occur for baudrates > 256kB - resolved
[18 issues]


FSiMX6 - V2.10 (Released 2016-07-07)
====================================

- 0002985: [Touch driver] Rework coordinate sampling routine - resolved
- 0002984: [Touch driver] SX865x Touch Driver may send multiple down-up events while one stylus down-up cycle - resolved
- 0002978: [Display] Add support for inverted backlight voltage - resolved
- 0002966: [NSPI] IOCTL_NSPI_WAITIRQ_XXX are not implemented - resolved
- 0002958: [F3S] Maximum size of a F3S partition is restricted to 128MB - resolved
- 0002957: [F3S] Files with size greater 32MB can't be written - resolved
- 0002956: [F3S] Debug message comes by writing files - resolved
- 0002955: [F3S] Improve file search - resolved
- 0002533: [Serial Driver/Interface] Add RS485 support - resolved
- 0002943: [Serial Driver/Interface] RS485 could lose data in receive - resolved
- 0002935: [NI2C] efusA9: I2C_B_IRQ is configured as output - resolved
 - 0002936: [Display] Driver configures I2C_B_IRQ (efusA9) or IRQ of AD controller (armStoneA9) as output - resolved
- 0002902: [OAL] Can't write bootscreen bmp with ndcucfg - resolved
- 0002932: [Serial Driver/Interface] Serial debug message doesn't show active key - resolved
- 0002918: [Tool/Utility] WEC2013: Add control panel app for storage manager - resolved
- 0002917: [WLAN] armStoneA9R2: PCB rev 1.10 needs change for pin reset - resolved
- 0002772: [USB device] Virtual COM over USB generates errors - resolved
[17 issues]


FSiMX6 - V2.00 (Released 2016-03-02)
====================================

- 0002840: [Ethernet] The second ethernet-interface(SMSC95001) can not be used as debug-interface. - resolved
- 0002626: [Kernel] Add language packs. At the time only "en-US" is available. - resolved
- 0002876: [General] C2013: Add all updates until M12_2015 (Update 26) - resolved
- 0002336: [USB host] Add SYSGEN_USB_SER - resolved
- 0002787: [Kernel] Add netlog utility to log network traffic. - resolved
- 0002882: [USB host] USBSER.Dll: .NET CF ApplyDCB() not working - resolved
 - 0002886: [Serial Driver/Interface] COM_MDD2: .NET CF ApplyDCB() not working - resolved
- 0002875: [General] Modem: Add support for uBlox Topy-L2 - resolved
- 0002874: [Tool/Utility] NDCUCFG: Add support for version V64 - resolved
- 0002877: [General] C7: Add all updates until M12_2015 (Update 54) - resolved
- 0002871: [HDMI] efusA9: Can't read EDID information from connected monitor - resolved
[11 issues]


FSiMX6 - v1.90 (Released 2016-02-26)
====================================

- 0002851: [Timer driver] Free resources while deinitialize the driver - resolved
- 0002613: [Touch driver] Set default registry for Touch_EDT_FTxxxx to practical values (EFUSA9 only) - resolved
- 0002635: [Display] Default display mode for QBlissA9 is uncorrect. - resolved
- 0002667: [HDMI] HDMI does not work (QBlissA9 only) - resolved
- 0002744: [USB device] Mass storage does not work - resolved
- 0002801: [Tool/Utility] Update ndcucfg to V62 - resolved
- 0002839: [Timer driver] Implement IO control for adjust the timer without reset - resolved
- 0002838: [Timer driver] Some timer events are missed at the beginning of the event cycle - resolved
- 0002799: [Serial Driver/Interface] Activate DMA transfer - resolved
[9 issues]


FSiMX6 - V1.80 (Released 2015-12-15)
====================================

- 0002738: [Tool/Utility] Add SIP (software input panel) for large screens (Embedded Compact 7 only) - resolved
- 0002453: [Display] Add support for commands "backlight on" and "backlight off" in display driver - resolved
- 0002598: [Display] Implement alphablending - resolved
- 0002784: [SD/MMC] Already insert card are not detected after software reset or reset over reset button - resolved
- 0002793: [Display] adjust solution for video memory allocation in kernel - resolved
- 0002797: [Kernel] Sporadic reboot by WDOG - resolved
- 0002798: [Display] Kernel V1.60 can not startup with ebootV100 - resolved
- 0002802: [Display] Default LCD does not work (armStoneA9) - resolved
[8 issues]


FSiMX6 - V1.70 (Released 2015-11-27)
====================================

- 0002476: [SD/MMC] ASA9: MicroSDCard doesn't detect automatically - resolved
- 0002436: [Display] VSync and HSync default setting should active high - resolved
- 0002437: [Display] Display "DE" Signal does not work correctly - resolved
- 0002452: [Display] Command "display power on" does not work. - resolved
- 0002757: [NSPI] Add support for armStoneA9R2 - resolved
- 0002788: [NI2C] Function I2CBusCheck and ClkToggleNumber not working - resolved
- 0002785: [SD/MMC] QBlissA9: µSD card is always write protected - resolved
- 0002774: [PWM] Add support for armStoneA9R2 - resolved
- 0002773: [Ethernet] Phy reset not working. - resolved
[9 issues]


FSiMX6 - V1.60 (Released 2015-10-16)
====================================

- 0002346: [Kernel] Implementation of variable clock frequency - resolved
- 0002646: [Display] Setting the value of drive strength does not work - resolved
- 0002741: [General] Add support for armStoneA9R2 - resolved
- 0002765: [Kernel] remain memory layout of kernel compatile with previously released versions - resolved
- 0002747: [Ethernet] Ethernet does not work at cold startup (picoMODA9) - resolved
- 0002728: [OAL] add support scaling ARM core frequency dynamically - resolved
- 0002662: [Kernel] Add support for more then 512MB RAM - resolved
- 0002645: [CEDDK] Implement function to adjust "Drive Strength" - resolved
- 0002396: [Display] Display rotate does not work correct if use NEON - resolved
- 0002755: [Serial Driver/Interface] Add support for armStoneA9R2 - resolved
- 0002748: [SD/MMC] Add support for armStoneA9R2 - resolved
- 0002763: [SMTP Client] Set time offset for current time zone in header to get correct time - resolved
- 0002661: [Audio] efusA9 - Quad: Audio not working - resolved
- 0002745: [Ethernet] add support for LAN9500A - resolved
- 0002750: [DIO] Some IO pins not accessable from DIO driver (PMA9 HW1.10 only) - resolved
- 0002756: [CEDDK] New function CEDDK_GetBoardName() to retrieve board name - resolved
- 0002754: [SD/MMC] QBlissA9 - Quad: µSD slot not working - resolved
- 0002753: [SD/MMC] efusA9 - Quad: SD_B (SINTF: SD slot) not working - resolved
- 0002746: [Display] Customer special program can not be shown in kernel v1.50 - resolved
- 0002739: [AIN] On neagtiv measured value it returns wrong skaled positiv data - resolved
[20 issues]


FSiMX6 - V1.50 (Released 2015-09-04)
====================================

- 0002622: [SD/MMC] MicroSDCard are not accessible after reboot over reset button - resolved
- 0002497: [Display] GCHAL driver outputs some unneeded messages on serial debug line. - resolved
- 0002458: [Kernel] Add support to read the CPU temperature - resolved
- 0002729: [AIN] SetFilePointer for switching channel does not work. - resolved
- 0002726: [DIO] IRQCfg=0 or IRQCfg=4 doesn't disable interrupt. It works like low level IRQ. - resolved
- 0002725: [General] C2013E: Add checkautostart.exe - resolved
- 0002710: [Kernel] QBlissA9 Data Abort at startup - resolved
- 0002669: [Audio] PicoMODA9 - implement audio driver (useable for >= HW1.10) - resolved
- 0002663: [Serial Driver/Interface] UART3 (COM3:) does not work (ASA9 only) - resolved
- 0002565: [Serial Driver/Interface] armStoneA9: COM3: doesn't work - resolved
- 0002432: [SD/MMC] Internal SD Card is not recognized (PMA9 only) - resolved
- 0002657: [Kernel] Add interface to read bootloaders - resolved
- 0002660: [FS Firmware] Allocated memory is not released - resolved
- 0002659: [Kernel] Improve error handling while read CPU temprature - resolved
- 0002656: [Kernel] Add interface to write bootloaders - resolved
- 0002642: [NSPI] Provide setting for adjust delay between command- and data bytes - resolved
- 0002652: [NSPI] SPI2(SPIA) doesn't work - resolved
- 0002644: [Kernel] C2013: Add component "Daylight Saving" - resolved
- 0002616: [NSPI] Chip select does toggel within one SPI transfer (PM9 only) - resolved
- 0002634: [NSPI] SPI Mode 2, 3 does not work and leads to unrecoverable misbehaviour - resolved
- 0002621: [NSPI] Implement IRQ Mode - resolved
- 0002627: [NSPI] SPI clock could not adjusted via registry - resolved
- 0002602: [NSPI] Write/Read more than four bytes cause driver crash - resolved
- 0002597: [NSPI] WriteFile transfers always multiple of four bytes - resolved
- 0002608: [General] CE2013: Batch files (.bat/.cmd) in folder StartUp are not working - resolved
 - 0002609: [General] CE2013: Files in folder StartUp are not started by default. - resolved
- 0002596: [NSPI] Clk and Mosi pins show no activity (ASA9 only (?)) - resolved
- 0002553: [Kernel] C2013: Controlpanel item "Network and Dial-Up Connectors" is not working - resolved
[29 issues]


FSiMX6 - V1.40 (Released 2015-03-27)
====================================


Includes all Microsoft Updates until Feb 2015
Needs new SDK and BSP to get XAML running!!

- 0002390: [NI2C] Problems with new display adapter (aSt-ADP-JHD1) and NI2C interface. - resolved
- 0002578: [PWM] Initial duty cycle setting via registry is not implemented - resolved
- 0002582: [Display] Update GPU libraries from VIVANTE - resolved
- 0002583: [Kernel] C7E: Add Update 44 (February 2015) - resolved
- 0002528: [Display] (PicoMODA9) The startup value for display contrast is not correct. - resolved
- 0002581: [Display] Contrast voltage can't be changed - resolved
- 0002579: [Touch driver] QBlissA9: Adding SX865x touch driver - resolved
[7 issues]


FSiMX6 - V1.30 (Released 2015-03-16)
====================================

- 0004055: [Touch driver] SX865X: check if a chip reset by ESD occured - resolved
- 0002527: [Tool/Utility] Add a i.MX6 item to PSD-Editor - resolved
- 0002575: [OAL] Add new cache driver for i.MX6 - resolved
- 0002560: [Kernel] Pixel failures with activated 2D acceleration - resolved
- 0002559: [General] CEPlayer can't play video with AccelLevel 1 - resolved
- 0002561: [Kernel] WEC7: Video has horinzontal stripes (software accelerated) - resolved
- 0002563: [CAN] CAN driver sends always message with ID=0 while initialisation - resolved
- 0002577: [SPI] armStoneA9: Wrong pin number for SPI CS - resolved
- 0002573: [DIO] Interrupt configuration for IO-Pin20 is impossible(ASA9) - resolved
- 0002564: [Serial Driver/Interface] ASA9: Incorrect registry values for COM2:, RX doesn't work - resolved
- 0002532: [Kernel] C7E Add software accelerated video support - resolved
- 0002546: [Touch driver] Wrong IRQ and Reset IO pins for MX224 controller (efusA9 only) - resolved
- 0002547: [Kernel] C7E: Add all updates until M01_2015 - resolved
[13 issues]


FSiMX6 - V1.20 (Released 2015-03-02)
====================================


Same as V1.10 but support for SMP added.

- 0002536: [General] Add support for MultiCore (V1.10 is only for iMX 6Solo) - resolved
- 0002548: [NAND-FMD] Add support for 8GBit nand flash from Spansion - resolved
- 0002540: [Matrix keyboard] WEC7: Add registry values for MATRIX keyboard driver by default. - resolved
- 0002539: [DIO] WEC7: Add registry values of DIO driver by default. - resolved
[4 issues]


FSiMX6 - V1.10 (Released 2015-02-10)
====================================


Only for iMX6 Solo. No support for Dual or QUad.

- 0002534: [Kernel] Reorganized usage of internal SRAM - resolved
- 0002099: [OAL] Add support for F&S OAL IOCTL extensions to get all ndcucfg functionality working. - resolved
- 0002498: [Ethernet] ENET Link takes very long - resolved
- 0002530: [Display] In Verbose mode: Output display settings to serial debug line - resolved
- 0002529: [Display] WEC2013: Update GPU binaries to version 09/2014 - resolved
- 0002524: [NI2C] ASA9: I2C1 Registry settings are missing - resolved
- 0002461: [DIO] Voltage drop under ohmic load - resolved
- 0002525: [Kernel] Output reason for Restart on serial debug line and store value in registry. - resolved
- 0002502: [Kernel] Make PicoMODA9 serial line assignment compatibel to previous PicoMODs - resolved
- 0002460: [Touch driver] sx865 touch send debug message "Invalid message - skipping" - resolved
- 0001776: [Kernel] EC7: Enable exFAT support - resolved
- 0002496: [CAN] CAN driver outputs some unneeded message on serial debug line. - resolved
- 0002503: [Tool/Utility] PicoMODA9: redirect serial instance of NDCUCfg to COM1 - resolved
[13 issues]


FSiMX6 - V1.00 (Released 2015-02-03)
====================================


Add support for new NBOOT
Add support for refresh strategy
Add support for F3S


- 0002474: [DIO] efusA9: Mapping of IO pin to connector is incorrect - resolved
- 0002542: [Display] Change RenderPlugin from OpenGL to DDraw because of performance problems. - resolved
- 0002473: [Kernel] C2013: Add all updates until M12_2014 - resolved
- 0002279: [Touch driver] Add registry values for adjust touch sensitivity to EDT touch driver - resolved
- 0002472: [Ethernet] PicoMODA9 KITL does not work - resolved
- 0002388: [Kernel] Set correct Platform name - resolved
- 0002500: [NI2C] Slave devices can hang the bus by holding SDA low - resolved
- 0002434: [NAND-FMD] Add support for new nand flash driver (with swap strategy) - resolved
- 0002468: [Ethernet] Babling TX Error - resolved
- 0002486: [NAND-FMD] Add support for updating EBoot and EBoot from EBoot or Windows image - resolved
- 0002454: [F3S] Adapt F3S to F&S iMX6 platform - resolved
- 0002493: [Tool/Utility] Update to NDUCCFG V58 to run on correct COM port - resolved
- 0002477: [CAN] Add registry settings for CAN interface(s) - resolved
- 0002469: [DIO] IRQ configuration is incorrect (level/edge) - resolved
- 0002479: [OAL] Interrupt done function doesn't clear status of GPIO IRQ's - resolved
- 0002223: [NAND-FMD] add swap block strategy for nand flash - resolved
- 0002439: [General] Add support for new NBOOT - resolved
- 0002273: [Kernel] W2013 for Solo and Dual light - resolved
- 0002438: [NAND-FMD] Add support for flash swap strategy - resolved
- 0002440: [DIO] Cannot read from an IO which is confugured as output - resolved
[20 issues]


FSiMX6 - V0.90 (Released 2014-11-20)
====================================

- 0002269: [OAL] Add support for DualLite CPU - resolved
- 0002337: [USB host] Enable catalog options for USB Bluetooth support. - resolved
- 0002379: [Display] Vivante 2D Accelerator does not work - resolved
- 0002339: [Tool/Utility] Implement Checkautostart - resolved
- 0002370: [Tool/Utility] add tool HDMICfg - resolved
- 0002421: [Kernel] One kernel image for various iMX6 CPUs - resolved
- 0002423: [HDMI] On the left side of monitor, there is always a pink stripe. - resolved
- 0002398: [CAN] Remove debug output in case of ERROR_TIMEOUT from IOCTLs. - resolved
- 0002395: [Display] Can't set display clock lower than 20MHz - resolved
- 0002393: [Display] Use ARM NEON extension for 2D software acceleration. - resolved
- 0002392: [Touch driver] Exception is thrown if you tip the touch at the edge of the display. - resolved
- 0002237: [USB device] Virtual COM over USB generates error - resolved
- 0002384: [Display] Add support for backlight control - resolved
- 0002381: [Display] PicoMODA9 RGB lcd interface does not work in combination with old start interface board. - resolved
- 0002369: [Tool/Utility] add support for KernelUpdate - resolved
- 0002368: [AIN] add support for Analog input - resolved
- 0002366: [DIO] same pad values for IO Pin75 and IO Pin76 (efusA9 only) - resolved
[17 issues]


FSiMX6 - V0.80 (Released 2014-09-22)
====================================

- 0001687: [CAN] Add support for CAN interface - resolved
- 0002268: [Display] Add support for display driver so customer can set mode and poalrity of signals HSync, VHSync, DCLK and DE - resolved
- 0001685: [Audio] Add support for Audio - resolved
- 0002341: [Kernel] WEC2013: .Net program doesn't start on each startup - resolved
- 0001914: [Audio] Add support for AUDIO - resolved
- 0002326: [RTC] Add Support for RTC - resolved
- 0002298: [NSPI] Add NSPI driver - resolved
- 0002331: [Display] Implement Direct Draw - resolved
- 0001975: [CAN] Add F&S CAN support - resolved
- 0002266: [CAN] message transmition in extended mode isn't working correctly - resolved
[10 issues]


FSiMX6 - V0.70 (Released 2014-07-11)
====================================

- 0002074: [Touch driver] Add support for PCAP touch controller ATMEL mXT224E - resolved
- 0002211: [Tool/Utility] Add virtual keyboard - resolved
- 0002283: [Display] Digital RGB display context shifted - resolved
- 0002284: [I2C] I2C3 doesn't work correctly - resolved
- 0001915: [SD/MMC] After warm reset SD-Card can't be accessed, - resolved
- 0002225: [DIO] add support dio table for EFUSA9 - resolved
[6 issues]


FSiMX6 - V0.60 (Released 2014-04-15)
====================================

- 0002224: [General] add support for imx6 Solo/DualLite - resolved
- 0002227: [Display] ETM070001ADH6 RGB LCD show something wrong with color - resolved
- 0002226: [Touch driver] add support for touch mxt224, sx865x, ft5406, ft5606 - resolved
[3 issues]


FSiMX6 - V0.50 (Released 2014-02-11)
====================================

- 0001964: [PWM] add support for PWM - resolved
- 0002228: [Display] add support for more display device - resolved
[2 issues]


FSiMX6 - V0.4 (Released 2014-01-13)
===================================

- 0001911: [OAL] add support for OAL - resolved
- 0001913: [RTC] Add support for external RTC - resolved
- 0001976: [NSPI] Add F&S NSPI support - resolved
- 0002093: [Touch driver] MXT224 dosn't work correctly with NI2C. - resolved
[4 issues]


FSiMX6 - V0.3 (Released 2013-12-04)
===================================

- 0001948: [NI2C] Add F&S NI2C support - resolved
- 0001974: [DIO] Add F&S DigitalIO support - resolved
- 0001910: [WDT] add support for Watchdog - resolved
- 0001912: [Display] add support for OpenGL and OpenVG - resolved
- 0001955: [Display] GPU3d driver crashed in ArmStoneA9. - resolved
[5 issues]


FSiMX6 - V0.2 (Released 2013-10-10)
===================================

- 0001905: [Tool/Utility] Add support for BSP generation - resolved
- 0001897: [DIO] Add support for F&S DIO driver - resolved
- 0001898: [NAND-FMD] Add Support for NAND-FMD - resolved
- 0001899: [BusEnum2] Add Support for BusEnum2 - resolved
- 0001900: [Touch driver] Add support for Touch Driver MXT224 - resolved
- 0001901: [I2C] Add support for NI2C - resolved
- 0001902: [General] Add support for ActiveSync - resolved
- 0001903: [Kernel] Add support for XIP Image - resolved
[8 issues]


FSiMX6 - V0.1 (Released 2013-08-29)
===================================

- 0001679: [USB host] Add support for USB Host - resolved
- 0001680: [Display] add support for LVDS - resolved
- 0001681: [Display] add support for HDMI - resolved
- 0001682: [I2C] add support I2C - resolved
- 0001683: [SD/MMC] Add support for SD Host - resolved
- 0001684: [Serial Driver/Interface] add support for serial interface - resolved
- 0001678: [USB device] Add support for USB device - resolved
- 0001629: [Ethernet] Add basic Ethernet support - resolved
[8 issues]