phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoCOMA5 Linux

 

Starterkit PicoCOMA5 Linux
  299,- €
Tax not included

PicoCOMA5-V2-LIN, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software

The starterkit offers you the possibility to connect an external periphery with PicoCOMA5 during the phase of development. PicoCOMA5 is a plug-in module and has all signals on a 80pol plug connector.
The kit contains a base board which leads out all PicoCOMA5 interfaces on common sockets or pin strips.


The PicoCOMA5 starterkit contains a PicoCOMA5-V2-LIN with Cortex-A5 & Cortex-M4 CPU, 256MB RAM, 256MB Flash, Audio, Ethernet, CAN and resisitive touch controller. Bootloader and a Linux Image are pre-installed.

The starterkit consists of a base board with a plugged-on PicoCOMA5 and a cable kit. The base board offers connection possibilites for the following interfaces: Ethernet, USB Host, USB Device, 2x RS232, SD Card, I²C, SPI, Audio (Line In, Line Out) and I/ O-Ports. The power supply is 5V. The starterkit comes with a 7" WVGA TFT with resistive touch panel (ET070080) and fitting display adapter with film cable and touch cable. Documentation and software is available online in our download area.

Additionally we can offer you a 4-hour Workshop. Its goal is to learn how to handle the PicoCOMA5 starterkit and to finish the workshop with a running system. Under Linux you learn how to work with Buildroot and other Linux tools.

Scope of Delivery

PicoCOMA5 TOP Linux
PCOMA5-V2-LIN
NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot, MQX
SKU: PCOMA5-V2-LIN

PCOM STARTINTF2 TOP
PicoCOMA5/A9X/A7 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, SD Karte, I²C, SPI, Audio (Line In, Line Out) and E/A-Ports.
SKU: PCOM4-SKIT-FERT1

armStone efus  RGB Kit
Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays and Display Kit

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15
120,- €
 
B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
Request  
armStone efus  RGB Kit Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT
170,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cables

B.MKAB.23 40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23
10,- €
 
B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C
80,- €
 
JTAG Debug Adapter JTAG Debug Adapter
To program Cortex-M4.
SKU: ADP-CMSIS
69,- €
 
Adapter RGB to DVI NetDCU/ PicoCOM DVI Adapter
Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen.
SKU: ADP-RGB2DVI
50,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €