Starterkit armStone™A5 Linux

The armStone™A5 in PicoITX format holds standard connectors for 2x Ethernet, USB Host, USB Device and Audio. Furthermore, a power plug is installed. LVDS display signals are found on a 25pol connector, the alternative RGB display interface is on a 34pol ESCDI interface. Resistive Touch (4-wire) is connected via a 4pol connector and capacitive Touch (I²C) is connected via a 6pol connector. The COM1 interface is on a 10pol connector. All other interfaces can be found on J1.

The armStone™A5 starterkit consists of an armStoneA5-V2-LIN (with 256MB RAM, 128MB Flash, Audio, 2x Ethernet, 2x CAN, 3x Serial, USB Host, USB Device, I²C, SPI, micro-SD Card Slot and resistive Touch controller).
Both, RGB display interface (34pol ESCDI) and the LVDS display interface (25pol socket) are equipped. You can either connect a RGB display or a LVDS display (not simulatenously).

Bootloader and Linux Image are already installed.

The scope of delivery includes an additional cable set, a power plug and an USB stick. On a supplement you can find the access data to documentation and software.

Additionally, we offer a 4-hour Workshop. The goal of the workshop is, to learn how to handle the armStone™A5 starterkit and completing it with a running system. Under Linux you learn how to deal with Buildroot and further Linux tools.

• Scope of Delivery
• Accessories

Scope of Delivery

aStoneA5-V2-LIN
NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot, MQX
SKU: aStoneA5-V2-LIN

Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT

Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3

Accessories

	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT	170,- €
	armStone™ Extension Routes interfaces of the 66pin feature connector to standard connectors. SKU: aStone-ADP-UNI1	130,- €
	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS	69,- €
	armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI	50,- €
	7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15	120,- €
	Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1	Request
	7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18	150,- €
	50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41	10,- €
	Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB	210,- €
	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €