PicoCore™RT1
Computer On Module with NXP i.MX RT1050 CPU
|
For the start of development, we recommend |
PicoCore™RT1 | ||
State | Samples | |
CPU | ||
CPU | NXP i.MX RT1050 | |
Core | ARM Cortex-M7 | |
No of Cores | 1 | |
Frequency | max. 600MHz | |
L2-Cache | 32KB | |
GPU | 2D | |
Operating System | ||
Real Time | FreeRTOS | |
Memory | ||
Interfaces | ||
SD-Card | 1x external | |
Ethernet | 1 | |
USB Host | 1 | |
USB Device | 1x OTG 2.0 | |
CAN | max. 2x | |
UART | max. 3x | |
I2C | max. 4x | |
SPI | max. 2x | |
Audio | Line In/ Out/ Mic/ Headphone/I2S | |
Touch Panel | analog resistive and PCAP Touch ext. via I2C | |
RTC | 1x | |
additional Interfaces | PWM, ADC, GPIO | |
Display | ||
RGB | 16bit | |
Common | ||
Supply Voltage | +3.8V bis 5.5VDC | |
Power Consumption | 1W typ. | |
Operating Temperature | 0°C - +70°C opt. -40°C - +85°C |
|
Size | 35x40mm (LxB) |
|
Weight | ~10g | |
Long Term Availability | 2031 |
PicoCore™RT1-V1 | |
State | Samples |
CPU | - |
CPU | NXP i.MX RT1050 |
Core | ARM Cortex-M7 |
No of Cores | 1 |
Frequency | max. 600MHz |
L2-Cache | 32KB |
GPU | 2D |
Operating System | - |
Real Time | FreeRTOS |
Memory | - |
Flash | 256MB QSPI 16kB EEPROM |
RAM | 32MB SDRAM |
Interfaces | - |
SD-Card | 1x external |
Ethernet | 1 |
USB Host | 1 |
USB Device | 1x OTG 2.0 |
CAN | max. 2x |
UART | max. 3x |
I2C | max. 4x |
SPI | max. 2x |
Audio | Line In/ Out/ Mic/ Headphone/I2S |
Touch Panel | analog resistive and PCAP Touch ext. via I2C |
RTC | 1x external IC |
additional Interfaces | PWM, ADC, GPIO |
Display | - |
RGB | 16bit |
Common | - |
Supply Voltage | +3.8V bis 5.5VDC |
Power Consumption | 1W typ. |
Operating Temperature | 0°C - +70°C opt. -40°C - +85°C |
Size | 35x40mm (LxB) |
Weight | ~10g |
Long Term Availability | 2031 |
PicoCore™RT1-V1 |
Starterkit PicoCore™RT1 PicoCore™RT1-V1, base board, display, cable kit, access data to documentation and software SKU: PCoreRT1-SKIT |
360,- € |
Software
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | |||
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display and Display Kits
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | |||
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | |||
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Cable
40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23 |
10,- € | |||
50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41 |
10,- € |
Adapters
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € | |||
Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1 |
50,- € |
Plug Connector
PicoCore™ 80 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R80PS.3 |
20,- € |
Workshops
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request |
Other Accessories
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | |||
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € |
tbd
PicoCoreRT1 - Product Flyer
- English (844 KB, pdf) - 07/07/2020
Usage
By downloading you accept our general terms and conditions.
PicoCoreRT1 - Hardware
- PicoCoreRT1 Hardware Documentation (477 KB, pdf) - 14/12/2020
- Starterkit Hardware Documentation (1.4 MB, pdf) - 07/01/2020
- Baseboard for Stepper Motors Hardware Documentation (713 KB, pdf) - 17/01/2020
- Starterkit Design Files (226 KB, zip) - 17/12/2018
- Starterkit Schematic (254 KB, pdf) - 17/12/2018
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variant
PicoCore™RT1-V1 NXP i.MX RT1050, Cortex-M7, 32MB SDRAM, 256MB QSPI Flash, 16kB EEPROM, Audio, Touch, RGB, 0°C - +70°C opt. -40°C - +85°C, 3.8V Supply, FreeRTOS SKU: PCoreRT1-V1 |
Request |
Starterkit
Starterkit PicoCore™RT1 PicoCore™RT1-V1, base board, display, cable kit, access data to documentation and software SKU: PCoreRT1-SKIT |
360,- € |
Accessories
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Link to the Forum
You will always find support in our forum.
Recent Contributions
28 Mar, 17:48 |
i.MX8M-Plus Linux Release Y2023.09 (Yocto 4.0) |
27 Mar, 11:52 |
Configuring ATF for power optimization |
26 Mar, 10:29 |
Issues with PicoCoreMX6UL-V4 - GPIO_J1_29 |
22 Mar, 08:27 |
New Yocto Release fsimx6-Y2022.09 |
21 Mar, 14:55 |
Cannot control GPIO2 from Cortex-M7 |
19 Mar, 14:34 |
How to patch the current 4.9.88 NXP kernel with full preemt realtime features? |
15 Mar, 15:28 |
New Yocto Release fsimx6ul-B2024.03 |
15 Mar, 15:26 |
New F&S Development Machine - Fedora36-arm32 |
15 Mar, 08:31 |
NET DCU 7 - 10MBit Ethernet |
14 Mar, 12:25 |
FSDeviceSpy & BCSend - Network Discover & Connection Tool |
Computer on Module | with NXP i.MX RT1050 | |
---|---|---|
Another member of the compact PicoCore™ Computer On Module product family is offered with the NXP i.MX RT1050 CPU. Crossover ProcessorThe i.MX RT1050 is the industry's first crossover processor, combining the high performance and high level of integration of an application processor with the ease of use and real-time functionality of a microcontroller. It uses a NXP i.MX RT1050 ARM® Cortex®-M7 CPU with up to 600MHz. ➜ more informationen on NXP i.MX RT1050 processor Long-term availability up to 2031Another characteristic is the long-term availability until minimum 2031. Features and InterfacesSDRAM is available as internal working memory and SPI NOR/NAND Flash (high reliability) is offered for the program memory. |
The two 80-pin connectors (1.5-4mm board-to-board space) bring a variety of interfaces on the baseboard. This results in compact size and a small board-to-board distance. The power supply is 5V, the power consumption is less than 1W (typ.) and the temperature range is 0°C - +70°C or -40°C - + 85°C. Operating SystemThe operating system is FreeRTOS. It is already prepared for development. |