phonenumber +49(0)711 123722-0
|
DE EN

NetDCU11.2

Note: This Product Is No Longer Available For New Developments!

System On Module with Marvell PXA270 CPU

 

 

 

Windows Embedded Lifetime

Feature Available until  End of Mainstream Support End of Extended Support
Windows Embedded Compact 2013 31.05.2028  10.09.2018 10.10.2023
Windows Embedded Compact 7 28.02.2026  12.04.2016 13.04.2021
Windows CE 6.0 28.02.2022  09.04.2013 10.04.2018

Windows Embedded CE 6.0 R3

WCE 6.0 R3 is available for the NetDCU11.2. The operating system already installed on the board. After a boot phase of approximately 10s, the board is ready for use. Use the supplied tools configure your display and interfaces. The programming is done with the Visual Studio 2005 in C++, C# or VB.NET. The display driver for NetDCU11 was optimized for the CPU in use and supports Direct 3D Mobile (D3DM). The Flash File System F3S is also available for NetDCU11.

Our FailSafe Flash File System F3S is also available for WCE 6.0.



NetDCU11.2 - Linux


NetDCU11.2 - Windows Embedded CE/Compact


Sorry, there are no files to show.


NetDCU11.2 - Display

 

Variant

NetDCU11 TOP windows NDCU11.2-WCE
128MB SDRAM, 64MB Flash, Wolfson Audio/Touch
SKU: NDCU11.2-WCE
Request  

Description Description
The NetDCU11.2 is another member of the NetDCU family. It can control displays with a resolution of 800 x 600. In addition to standard interfaces such as RS232, LCD, touch and Ethernet, the module also has a CAN 2.0 controller and an audio codec. With the help of the audio codec is a voice over IP (VOIP) connection to another computer possible.   For the integrated CAN controller is a CANOpen stack available. The standard memory of 64MB Flash and 64MB SDRAM is for the most application sufficient. The used ARM9 CPU (PXA270) runs with a clock frequency of 520MHz and can handle more challenging screen displays.