The PicoCOM family offers the user compact and inexpensive COM modules. All modules are compatible. It was our goal to offer as many standardized interfaces as possible with the PicoCOM modules, all completely supported by the integrated OS. This allows a fast development of application software without requiring any in-depth hardware knowledge. Integrating the module into the surrounding hardware should be equally uncomplicated.
Therefore the whole power-management of the CPU is already provided on-board and the board gets plugged on the base board of the customer via a robust 80pol plug connector. Only some additional interface drivers (RS232, Ethernet transformer) are necessary. All modules of this family have the same size (40mm x 50mm) and use the same plug connector, where the first half of the pins carries fix signals and the second half offers module-specific interfaces. Thus an upgrade to future modules of this series is possible anytime (UpGrade to modules with higher processing power and more memory, as well as UpGrade to later, more inexpensive modules).
|Windows:||WCE 6.0 R3||WCE 6.0 R3||WCE 6.0 R3
|Linux:||2.6 (Emlix Eval/ Pro)||2.6.37||3.3|
|Core:||ARM 926 EJ||ARM 9||Cortex-A5 + Cortex-M4|
|Frequency:||210 MHz||400 MHz||400 - 600 MHz + 167 MHz|
|Video/ Acceleration:||CPU||CPU, 2D||NEON, Vivante GC355, 2D, FPU|
|Ethernet:||10/ 100MB||10/ 100MB||10/ 100MB|
|USB Host:||1-2 (2.0 FS)||1-2 (1.1 FS)||1-2 (2.0)|
|USB Device:||0-1 (2.0 FS)||0-1 OTG (2.0 HS)*||1 (2.0)|
|Audio:||In/ Out||In/ Out||In/ Out|
|Analog I:||3 (10 Bit)|
|TFT up to:||WVGA||SVGA|
FS = Full Speed 12MBit/s
HS = High Speed 480MBit/s
OTG = OnTheGo, can be used as host or device. Please check driver if it supports host mode!
* is listed as RS232/ RS485 for starter kit version